Technical Bulletin – SC-004
March 30, 2007

New Rear Pan Hard Setup

C&R have designed a new Pan Hard frame which allows a lower rear roll center configuration.  This is the recommended setup for the upcoming Iowa and Darlington races.  This part will require the chassis to be modified to the drawing accompanying this bulletin entitled modification to chassis low RC.doc

The existing panhard mounting bracket on the upright is utilized in this setup.  Remove the bracket and it’s mounting studs from the LH upright.  Fit the studs to the two center height stud holes and refit the bracket as shown below.  The existing panhard mounting bracket to the chassis and the panhard rod end joints are also utilized.

                                  

CR-SC-BG0001A panhard frame low RC

The new pan hard frame will be available from C&R on Monday April 30, 2007 for a retail price of $630 each providing teams have placed orders with Mr. Peter Wilska by Monday April 9.

If in doubt please contact Bruce Ashmore
Shop: 317-293-4100
Cell: 317-496-9909